If Pluggable terminal blocks Companies any tool fails to pass, the Parallel Output tool will send a failure signal to the punching machine controller according to the flow line regulations, and the punching machine will stop running immediately. 3. The solution to the 'overspeed' problem is to carefully adjust the speed of the reel. For the visual inspection system, only this slight modification enables a simple and more reliable solution to an originally complicated problem.
The inspection results of the above-mentioned various visual inspection tools will also be collected and displayed on the operating screen; or output to other software running on the host for further statistical analysis, such as electronic data tables or statistical process control (SPC) programs. When various vision systems become more and more common, people are becoming more and more familiar with the characteristics of such inspection systems and have leaed to consider the detectability of product quality when designing new products.
3.7 milliseconds); (right image-example of partial scanning mode: acquire a partial (640x120) image within 4. . This also brings another problem to the visual inspection system. If they are mistaken as metal adhesion debris by the visual inspection system, it will lead to false detection. All pixels covered under the template (shown in single gray in the figure) should be Black; if the pins are deformed or distorted, some of these pixels will become brighter and fail to pass the template inspection. These ROIs will tell the vision system where to find the target and the information found.
In the subsequent actual production inspection, the system will measure the distance between the corresponding edge lines of each part. Electronic connectors The manufacturer hopes that the inspection system can detect various inconsistent defects such as small scratches and pinholes on the plating surface of the connector pins